Crouzet's RHP Hybrid Solid State Relays


	SSR Applications
	Contact us
	Site Map
	Webmaster

RHP Hybrid Solid-State Relays

>5 Million Operations

Crouzet's patented RHP “Hybrid” solid-state relays combine all of the advantages of a solid-state relay and an electromechanical relay into one 17.5mm package! The result is a relay without a heat sink capable of 5 million operations when switching a 20 amp load. Put in perspective, the RHP's life expectancy is 50 times that of a typical electromechanical relay!

RHP Operating Principles;
Heat is the primary contributor to failures in a solid-state relay, while electrical arcing is the primary contributor to failures in electromechanical relays. The RHP is designed to use the advantages of each technology to offset the weakness in each technology. The output consists of one solid-state circuit in parallel with an electromechanical circuit. The solid-state output swtiches the load when the control signal is applied to the input. Once load-current is established, the electromechanical relay energizes, effectiviely bypassing the solid-state output for the duration of the duty-cycle. When the control signal is removed, the electromechanical relay de-energizes, allowing the solid-state output to “break” load current.

Since the solid-state relay is bypassed by the electromechanical relay during normal operation, there is little or no heat build-up inside the relay. This allows the device to operate without a heat sink. Moreover, since the electromechanical relay energizes without voltage across the output contacts (omitting the typical 1.6 volt drop across the solid-state output), there is no electrical arcing on the contacts. The combination provides the customer with an extremely reliable relay capable of switching 20 amp loads while only consuming 17.5mm of panel space!

	Product Overview
	GN Solid State Relays
	DIN-Rail Solid State Relays
	Dual Solid State Relays
	Solid State Relay Assemblies
	Hybrid Solid State Relays
	Three-Phase Solid State Relays
	DC Solid State Relays
	PC Mount Solid State Relays
	SIMM Interface Relays

RHP Solid State Relay Online Catalog

Crouzet's RHP Solid State Relays

Crouzet's RHP Hybrid Solid State Relay

GN SERIES SOLID STATE RELAYS
• AC Output Solid State Relays
• Ratings from 10 to 125 Amps
• DBC Substrate
• Built-In Transient Protection
• LED Input Status Indicator

COOLTECH DIN-RAIL SOLID STATE RELAYS
• No Heat Sink Calculations Required
• Epoxy-Free Design
• DIN-Rail or Panel Mount
• DBC Substrate
• Built-In Transient Protection
• LED Input Status Indicator
• Relay or Contactor Configuration

DUAL OUTPUT SOLID STATE RELAYS
• True 40A Per Channel Relays
• 240Vac or 600Vac Outputs
• Built-In Transient Protection
• 4-15Vdc or 17-32Vdc Inputs
• Optional Keyed/Locking Input Connector

SOLID STATE RELAY ASSEMBLIES
• DIN Rail Mount Heat Sink Assemblies
• No Heat Sink Calculations Required
• Standard Ratings up to 45A at 660Vac
• Internal Transient Protection
• LED Input Status Indicator

RHP HYBRID SOLID STATE RELAY
• 20A/240Vac Output (resistive)
• Compact 17.5mm Housing
• No Heat-Sink Required
• >5M Operations at Full Load
• UL/cUL Listed

THREE-PHASE SOLID STATE RELAYS
• 25A, & 50A Three-Phase Outputs
• 25A & 50A Motor-Reversing Outputs
• DBC Substrate
• Built-In Transient Protection
• Interlock Circuit (Motor-Reversing)
• LED Input Status Indicator

DC OUTPUT SOLID STATE RELAYS
• 10A, 15A, & 30A FET Outputs
• 10A / 60Vdc Transistor Output
• Low On-State Resistance (FET Relays)
• IP20 or IP00 Housing
• LED Input Status Indicator

PC MOUNT SOLID STATE RELAYS
• Up-To 25A at 480Vac Output
• SCR or Triac Output
• SIP or Flat-Pack
• 4Kv Optical Isolation
• UL Recognized / CE Complaint

SIMM INTERFACE RELAYS
• 6.2mm DIN Mount IP20 Housing
• Transistor, Triac, or EMR Outputs
• 6 Amp Form C Output Relay (EMR Output)
• LED Status Indicator

HEAT SINKS & ASSEMBLIES
• DIN or Panel Mount
• Standard Heat Sinks up-to 0.5°C/W
• One or Multiple Relays
• Custom Assemblies