Crouzet's Dual Solid State Relays


	SSR Applications
	Contact us
	Site Map
	Webmaster

Dual Series Solid-State Relays

Two Solid-State Relays in One Package

Crouzet's dual solid-state relays perfectly compliment the standard single-phase SSR line (GN series). Each relay has two outputs controlled by two independent inputs. This allows engineers using multiple solid state relays in a panel to save space in some applications, while maintaining the same number of poles for switching their loads.

Crouzet's Dual Solid-State Relay Features;
As with our GN series solid-state relays, the dual SSR's also utilize a DBC substrate, bussed power lead-frame, and come equipped with internal transient protection. The advantage of using a dual solid-state relay is that two loads can be switched in half the space of a traditional single-phase SSR. Each output is controlled by it's own independent input, allowing for individual loads to be powered separately.

Crouzet's dual solid-state relays are rated at 25 or 40 amps (50 & 80 amps total, respectively) at either 24-240Vac or 48-660Vac. They are available with either ¼" QC terminals or traditional saddle-clamps. The input connector is either a standard four-pin male terminal or four-pin keyed/locking terminal block.

The mounting dimensions for the dual SSR's are identical to the GN series relays, so they conveniently mount to all of our standard panel and DIN rail heat sinks. As a precautionary note, the total package current (both channels combined) must be used when determining the appropriate heat sink for use with a dual solid-state relay.

	Product Overview
	GN Solid State Relays
	DIN-Rail Solid State Relays
	Dual Solid State Relays
	Solid State Relay Assemblies
	Hybrid Solid State Relays
	Three-Phase Solid State Relays
	DC Solid State Relays
	PC Mount Solid State Relays
	SIMM Interface Relays

Dual Solid State Relay Online Catalog

Crouzet Solid State Relays

Crouzet's GN Solid State Relays

GN SERIES SOLID STATE RELAYS
• AC Output Solid State Relays
• Ratings from 10 to 125 Amps
• DBC Substrate
• Built-In Transient Protection
• LED Input Status Indicator

COOLTECH DIN-RAIL SOLID STATE RELAYS
• No Heat Sink Calculations Required
• Epoxy-Free Design
• DIN-Rail or Panel Mount
• DBC Substrate
• Built-In Transient Protection
• LED Input Status Indicator
• Relay or Contactor Configuration

DUAL OUTPUT SOLID STATE RELAYS
• True 40A Per Channel Relays
• 240Vac or 600Vac Outputs
• Built-In Transient Protection
• 4-15Vdc or 17-32Vdc Inputs
• Optional Keyed/Locking Input Connector

SOLID STATE RELAY ASSEMBLIES
• DIN Rail Mount Heat Sink Assemblies
• No Heat Sink Calculations Required
• Standard Ratings up to 45A at 660Vac
• Internal Transient Protection
• LED Input Status Indicator

RHP HYBRID SOLID STATE RELAY
• 20A/240Vac Output (resistive)
• Compact 17.5mm Housing
• No Heat-Sink Required
• >5M Operations at Full Load
• UL/cUL Listed

THREE-PHASE SOLID STATE RELAYS
• 25A, & 50A Three-Phase Outputs
• 25A & 50A Motor-Reversing Outputs
• DBC Substrate
• Built-In Transient Protection
• Interlock Circuit (Motor-Reversing)
• LED Input Status Indicator

DC OUTPUT SOLID STATE RELAYS
• 10A, 15A, & 30A FET Outputs
• 10A / 60Vdc Transistor Output
• Low On-State Resistance (FET Relays)
• IP20 or IP00 Housing
• LED Input Status Indicator

PC MOUNT SOLID STATE RELAYS
• Up-To 25A at 480Vac Output
• SCR or Triac Output
• SIP or Flat-Pack
• 4Kv Optical Isolation
• UL Recognized / CE Complaint

SIMM INTERFACE RELAYS
• 6.2mm DIN Mount IP20 Housing
• Transistor, Triac, or EMR Outputs
• 6 Amp Form C Output Relay (EMR Output)
• LED Status Indicator

HEAT SINKS & ASSEMBLIES
• DIN or Panel Mount
• Standard Heat Sinks up-to 0.5°C/W
• One or Multiple Relays
• Custom Assemblies