www.crouzet-usa.com |
 |
 |
 |
 |
 |
 |
|
|
||||||||||||||||||||||||||||||||||||||
|
GN SERIES SOLID STATE RELAYS • AC Output Solid State Relays • Ratings from 10 to 125 Amps • DBC Substrate • Built-In Transient Protection • LED Input Status Indicator |
 |
|
COOLTECH DIN-RAIL SOLID STATE RELAYS • No Heat Sink Calculations Required • Epoxy-Free Design • DIN-Rail or Panel Mount • DBC Substrate • Built-In Transient Protection • LED Input Status Indicator • Relay or Contactor Configuration |
 |
|
DUAL OUTPUT SOLID STATE RELAYS • True 40A Per Channel Relays • 240Vac or 600Vac Outputs • Built-In Transient Protection • 4-15Vdc or 17-32Vdc Inputs • Optional Keyed/Locking Input Connector |
 |
|
SOLID STATE RELAY ASSEMBLIES • DIN Rail Mount Heat Sink Assemblies • No Heat Sink Calculations Required • Standard Ratings up to 45A at 660Vac • Internal Transient Protection • LED Input Status Indicator |
 |
|
RHP HYBRID SOLID STATE RELAY • 20A/240Vac Output (resistive) • Compact 17.5mm Housing • No Heat-Sink Required • >5M Operations at Full Load • UL/cUL Listed |
 |
|
THREE-PHASE SOLID STATE RELAYS • 25A, & 50A Three-Phase Outputs • 25A & 50A Motor-Reversing Outputs • DBC Substrate • Built-In Transient Protection • Interlock Circuit (Motor-Reversing) • LED Input Status Indicator |
 |
|
DC OUTPUT SOLID STATE RELAYS • 10A, 15A, & 30A FET Outputs • 10A / 60Vdc Transistor Output • Low On-State Resistance (FET Relays) • IP20 or IP00 Housing • LED Input Status Indicator |
 |
|
PC MOUNT SOLID STATE RELAYS • Up-To 25A at 480Vac Output • SCR or Triac Output • SIP or Flat-Pack • 4Kv Optical Isolation • UL Recognized / CE Complaint |
 |
|
SIMM INTERFACE RELAYS • 6.2mm DIN Mount IP20 Housing • Transistor, Triac, or EMR Outputs • 6 Amp Form C Output Relay (EMR Output) • LED Status Indicator |
 |
|
HEAT SINKS & ASSEMBLIES • DIN or Panel Mount • Standard Heat Sinks up-to 0.5°C/W • One or Multiple Relays • Custom Assemblies |
 |
10, 15, or 30 amp output ratings
